Pressure sensor_Baoji HengTong Electronics Co., Ltd.

Explain
Feature
Technology
Shape
Connection
Guide
Download

The mail measurement element of BP9325 is HT series silicon oil-filled sensor, which can transfer pressure to linearization voltage signal. the material of housing and pressure port are stainless steel , which can compatible with liquids and gases. It has high reliability and stability.

Feature
Measurement Range: 0~6KPa~60MPa
Piezoresistive silicon sensing element
High reliability and stability

Application
Process control system
Pressure transmitter
Refrigeration system
Air compressor

Specification

Pressure range	0~6KPa~60MPa
Proof pressure	≤1.5X rated pressure or 110MPa, which ever is less
Power supply	Current：1.5mA Voltage：9VDC
Zero output	＜±2 mV
Span output	DC100±20 mV
Accuracy	±0.1 %（Min） ±0.25%（Typical） ±0.5%（Max.）
Long stability	±0.3%F.S/year
Pressure Port	M12×1 or customize
Compensate temperature range	0℃~70℃
Operate temperature range	-10℃~80℃
Store temperature range	-40℃~100℃
Housing material	Stainless steel : 1Cr18Ni9Ti
Diaphragm material	316L
O-ring material	Fluororubber
Cable	polyethylene
Insulation resistance	100MΩ 100VDC
Protection	IP65

Ordering note:
If you have Special requirement please consult us.

Ordering Information:
1.In order to ensure that the sensor can safe and reliable operate, you can installed three valves between the sensor and the measured point to ensure that the medium slow and evenly applied to the positive, negative pressure in the cavity of the differential pressure sensor.
2. Suggest that level of small range differential pressure sensor installation.
3.Pay attention to the pressure range and the static pressure value of the differential sensor can meets the corresponding requirements of the measured differential pressure point.
4. It is strictly prohibited to negative pressure higher than positive pressure in the cavity.

Click to download